|
 |
 |
|
 |
Key Features
• 350 MHz (-3 dB) RGB bandwidth, fully loaded
• Gain and peaking controls
• Rack-mountable or portable
The Extron P/2 DA2xi is a one input, two output, high resolution VGA-QXGA distribution amplifier that's ideal for use in dual-display presentation systems or anywhere that a single, high resolution VGA signal needs to be routed to two displays.
The Extron P/2 DA2xi is a one input, two output, high resolution VGA-QXGA distribution amplifier that's ideal for use in dual-display presentation systems or anywhere that a single, high resolution VGA signal needs to be routed to two displays. Housed in a compact, durable metal enclosure, the P/2 DA2xi can be easily installed in small, tight places. It's even portable enough to fit into a briefcase for presenters on-the-go.
The P/2 DA2xi offers 350 MHz (-3 dB) RGB video bandwidth and is compatible with VGA-QXGA graphic cards, monitors, and projectors. Video gain and peaking levels are DIP switch selectable, and both sync input and output impedance can be set for optimum compatibility with laptop computers. Utilizing an optional VersaTools® or Universal Rack Shelf Kit, the P/2 DA2xi can be rack-mounted alone or with up to three other quarter-rack width A/V products. The P/2 DA2xi can also be mounted under a desk or next to a projector with an Extron PMK Series or MBU Series mount kit.
| Video |
| Gain |
Output: 0 dB or 0.4 dB, selectable
Local monitor output: unity |
| Peaking |
Output: selectable, 0.7 dB or 1.4 dB at 100 MHz
Local monitor output: fixed |
| Bandwidth |
350 MHz (-3 dB) |
|
| Video input |
| Number/signal type |
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
(1) 15-pin HD female |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 135 kHz |
| Vertical frequency |
30 Hz to 170 Hz |
| Return loss |
<-38 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
| Input coupling |
DC |
|
| Video output |
| Number/signal type |
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs output
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through (i.d. bits are passed through) |
| Connectors |
(2) 15-pin HD female |
| Nominal level |
0.7 Vp-p for RGB at unity gain |
| Minimum/maximum levels |
Analog, 0.3 V to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs |
| Input level |
1.5 V to 5.0 Vp-p |
| Output level |
TTL, 5 Vp-p, unterminated |
| Input impedance |
<1k ohm (default) or 10k ohms, selectable |
| Output impedance |
75 ohms (default) or 50 ohms, selectable |
| Max. propagation delay |
60 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, 4.5 watts, external, autoswitchable;
to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.2 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional 1U rack shelf, part #60-190-01or 60-604-01; or VersaTools® rack shelf, part #60-190-20 or 60-604-20; projector mountable with an optional bracket kit, part #70-077-04.
Also under-furniture mountable with optional brackets #70-077-01 (optional) |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.0" H x 4.3" W x 3.0" D (quarter rack wide)
2.5 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.) |
| Product weight |
0.5 lbs (0.3 kg) |
| Shipping weight |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
