The Extron MAV 62 AV is designed to route composite video and stereo audio (balanced/unbalanced) signals. An off-the-shelf solution, the MAV 62 AV is ideal for a wide range of matrix switching applications. Corporate boardrooms, command and control centers, museums, university classrooms, sports bars, videoconferencing rooms, and home theaters are all environments where the MAV 62 AV matrix switcher is effective.

• 150 MHz (-3dB) video bandwidth, fully loaded – Ensures flawless switching and distribution of signals without signal degradation. The 150 MHz (-3dB) is a worst case specification, i.e., the MAV matrix switcher provides 150 MHz (-3dB) at full performance capacity when one input signal drives all outputs.
• Video genlock and vertical interval switching – Broadcast quality NTSC, PAL, or SECAM video genlock capabilities allow for vertical interval switching. This enables smooth, seamless transitions when switching between inputs.
• Quad standard – MAV matrix switchers are capable of switching NTSC 3.58, NTSC 4.43, PAL, and SECAM video (quad standard) for worldwide compatibility.
• Balanced and unbalanced audio – Accepts both balanced and unbalanced stereo audio signals on captive screw connectors.
• Audio input gain and attenuation – Balances all audio inputs so there is no noticeable difference between volume levels. Adjustments can be made directly from the front panel or through RS-232 control, input by input.
• Audio breakaway – Provides the capability to break away an audio signal from its corresponding video signal. Audio breakaway switching can be done via the front panel or RS-232 remote.
• QuickSwitch Front Panel Controller (QS-FPC™) – Allows for touch-of-a-button input and output selection.
• RS-232 control – A rear panel, RS-232 control port provides connection of the MAV matrix switchers to a third party control system. The Extron Simple Instruction Set (SIS™) allows for quick and easy programming.
• Simple Instruction Set (SIS) – Extron's SIS is a set of basic ASCII code commands that provide simple control through a third party control system. Instead of programming in long, obscure strings of code, the SIS makes it easy to operate an Extron product using RS-232 control.
• Control software – For RS-232 remote control from a PC, Extron ships our Windows®-based control software with every matrix switcher. This icon-driven software uses a graphical, drag-and-drop interface to make I/O configuration and other customization functions simple and convenient. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may then be saved for future downloading to the matrix switcher.
• MCP 1000 and MKP 1000 control – Utilizing the MCP 1000 Master Control Panel and any combination of MCP 1000 slave control panels or MKP 1000 control keypads offers the flexibility to control a MAV matrix switcher from a remote location. Each MCP 1000 panel may be used for one button switching for a particular output and selecting global presets. Each MKP 1000 keypad may be used to select a different input or preset.
• Front panel security lockout – If a MAV matrix switcher is installed in an unsecured environment where easy access is undesirable, a security lock-out feature may be implemented. During lock-out mode, a special button combination is required to operate the front panel controller.
• Internal international power supply – The autoswitchable, internal power supply provides worldwide power compatibility.