• Output on a shielded RJ-45 connector
• External international power supply included (part number 70-057-01)
• Through- or under-desk mountable
• Rugged metal enclosure

Video ― video models
Number/signal type	1, 2, or 4 sets of proprietary analog signals
Connectors
TP T 15HD 45	(1) 8-pin spring force captive wire connector
All other models	1, 2, or 4 shielded RJ-45 female
Video input ― video models
Number/signal type
TP T 460, TP T 15HD A, TP T 15HD 45	1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source
TP T 15HD AV	1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source and 1 NTSC/PAL/SECAM composite video
TP T BNC, TP T BNC DA4	1 analog RGBHV, RGBS, RGsB, component video, or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source
TP T AV	1 NTSC/PAL/SECAM composite video
Connectors
TP T 15HD A, TP T 460, TP T 15HD 45	(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available)
TP T 15HD AV	(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available), 1 RCA female
TP T BNC, TP T BNC DA4	5 BNC female
TP T AV	1 RCA female
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB 0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels	0.3 V to 1.45 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 130 kHz
Vertical frequency	30 Hz to 150 Hz
Return loss	<-30 dB @ 5 MHz
DC offset (max. allowable)	100 mV
Video output ― refer to the TP Receivers Family User's Manual, part #68-547-02
Audio ― audio models
Number/signal type	1 or 2 sets of analog proprietary signals
Connectors
TP T A 45	(1) 2-pin direct insertion captive screw connector
All other models	1 or 2 shielded RJ-45 female
Frequency response	20 Hz to 20 kHz, >÷0.05 dB
THD + Noise	0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N	>63 dB at maximum output (unweighted)
Crosstalk	<-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
CMRR	>33 dB @ 20 Hz to 20 kHz
Audio input ― audio models
Number/signal type
TP T 15HD A, TP T AV, TP T 460, TP T A 45	1 stereo, unbalanced
TP T 15HD AV	2 stereo, unbalanced
Connectors
TP T 15HD A, TP T 460, TP T A 45	(1) 3.5 mm mini jack
TP T 15HD AV	(1) 3.5 mm mini jack, 2 female RCA
TP T AV	2 female RCA
Impedance
TP T A 45	>10k ohms, unbalanced, DC coupled
All other models	5k ohms, unbalanced, DC coupled
Nominal level	-10 dBV (316 mV)
Maximum level	+5.5 dBu, (unbalanced) at 1%THD+N
CMRR	>75 dB @ 20 Hz to 20 kHz
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≒ 2 dBu.
Audio output ― refer to the TP Receivers Family User's Manual, part #68-547-02
General
Power
TP T 15HD A, TP T 15HD AV, TP TBNC, TP T 460	15 VDC, 0.8 A, external or provided by the TP R receiver for up to 300' distance
TP T AV	15 VDC, 0.8 A, external or provided by the TP R receiver for up to 800' distance
TP T BNC DA4	15 VDC, 0.8 A, external
TP T 15HD 45	12 VDC, 1.0 A, external
TP T A 45	Shared with the TP T 15HD 45 transmitter
NOTE The TP R 15HD A receiver will not provide power to any twisted pair transmitter.
Temperature/humidity	Storage -40 to +158 ▲F (-40 to +70 ▲C) / 10% to 90%, noncondensing Operating +32 to +122 ▲F (0 to +50 ▲C) / 10% to 90%, noncondensing
Rack mount
TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4	Yes, with optional 1U rack shelf, part #60-190-01 or #60-604-01, and rack shelf mounting kit #70-123-01. Furniture mountable with optional mounting brackets #70-077-01 or #70-077-02.
TP T AV	No, but furniture mountable with optional mounting brackets #70-077-01, 70-077-02
TP T 460	No, but wall or furniture mountable.
TP T 15HD 45, TP T A 45	No, but mountable in a 45 mm x 45 mm opening
Enclosure type	Metal
Enclosure dimensions
TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4	1.3" H x 6.8" W x 4.5" D (<1U high, (3.3 cm H x 17.3 cm W x 11.4 cm D) (Depth excludes connectors.)
TP T AV	1.3" H x 4.8" W x 4.5" D (3.3 cm H x 12.2 cm W x 11.4 cm D) (Depth excludes connectors.)
TP T 460
Plate	4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang)
Interface enclosure	2.6" H x 3.1" W x 1.1" D (6.6 cm H x 7.9 cm W x 2.8 cm D) (Depth excludes front panel connectors and controls.)
TP T 460 EC
Faceplate	3.25" H x 3.9" W x 0.1" D (8.3 cm H x 10.0 cm W x 0.3 cm D)
Interface enclosure	2.5" H x 3.7" W x 1.75" D (6.4 cm H x 9.4 cm W x 4.5 cm D) (Depth excludes connectors and knobs.)
TP T 15HD 45, TP T A 45
Faceplate	1.8" H x 1.8" W x 0.8" D (45 mm H x 45 mm W x 20 mm D)
Device	1.1" H x 1.6" W x 1.2" D (29 mm H x 41 mm W x 30 mm D) (Depth excludes connectors.)
Product weight
TP T 15HD A, TP T 15HD AV	0.8 lbs (0.4 kg)
TP T BNC, TP T BNC DA4	0.9 lbs (0.4 kg)
TP T AV	0.5 lbs (0.3 kg)
TP T 460, TP T 460 EC	0.5 lbs (0.3 kg)
TP T 15HD 45, TP T A 45	0.3 lbs (0.1 kg)
Shipping weight
TP T AV	2 lbs (1 kg)
All other models	3 lbs (2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Listings (all models except TP T 15HD 45 and TP T A 45)	UL, CUL
Compliances	CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF	30,000 hours