|
 |
 |
|
 |
The Extron MTP R 15HD RS Mini Twisted Pair Receiver and MTP RL 15HD RS Mini Twisted Pair Receiver with Loop Through work with the MTP T 15HD RS Transmitter to transmit RGB, component, S-video, or composite video and bi-directional RS-232 signals long distances over a single unshielded twisted pair (UTP) cable. The MTP 15HD RS Series can be used with any CAT 5, 5e, or 6 twisted pair cable or with Extron Enhanced Skew-Free?A/V UTP cable (patent pending) for cable runs of up to 600 feet (185 meters) with XGA signals or up to 450 feet (135 meters) with UXGA signals.
Extron MTP 15HD RS transmitters and receivers precisely optimize image quality for various UTP cable lengths using adjustment controls on both the transmitter and receiver. The transmitters feature a pre-peaking switch that provides additional compensation at the front end for the longest cable runs. The receivers offer continuously variable gain and peaking controls, allowing users to dial in the exact amount of gain and peaking required for each unique cable run.
The Extron MTP R 15HD RS Mini Twisted Pair Receiver accepts video and serial control signals on a female RJ-45 connector. Video signals are output on a female 15-pin HD connector while serial communication signals are output on a 3.5 mm captive screw connector. The MTP R 15HD RS receiver features separate continuously variable level and peaking adjustments that enable users to compensate for any signal degradation associated with long cable runs. A set of dip switches on the rear panel make it easy to configure the output signal and output sync formats.
The Extron MTP RL 15HD RS Mini Twisted Pair Receiver with Loop Through has all of the same features and functionality as the MTP R 15HD RS, with an added female RJ-45 output connector. This additional buffered output enables multiple MTP RL 15HD RS receivers to be connected in series, reducing the number of parallel cable runs required.
The MTP T 15HD RS and MTP R 15HD RS are compatible with resolutions up to 1600 x 1200 (UXGA) and are ideal for such applications as large training facilities, museums, airports, movie theaters, and hotels. These products are well suited for any application that requires a cost-effective solution for sending RGBHV, RGBS, HDTV and other high resolution video and bi-directional RS-232 signals long distances over UTP cable.
When using data grade twisted pair cable for sending high-resolution video signals long distances, a problem called skew can cause a distortion in the image, resulting in visible color separation. Extron offers two options for solving this problem and restoring image quality. The first option is to place an SEQ 100 15HD Skew Equalizer at the receiving end of any cable run where skew is a problem. The second option is to use Extron's Enhanced Skew-Free?A/V UTP cable to make system connections.
Because the MTP 15HD RS Series transmitter and receivers utilize UTP cable for the distribution of high resolution RGBHV and serial control signals over long distances, they offer considerable advantages in cost, performance, and ease of installation. UTP cable is a fraction of the size of coaxial cable, and much lighter, more flexible, and less expensive, thus providing A/V system designers and installers with an economical, space efficient solution for a variety of applications.
Extron MTP Transmitters and Receivers are part of the VersaTools?family of economical, compact products designed for easy integration into new and existing A/V environments. MTPs are compact so they can fit just about anywhere: in equipment racks, under tables and desktops, or next to a projector.
Receives high resolution computer-video and bi-directional RS-232 signals over a single CAT 5, 5e, or 6 UTP cable
Compatible with RGBHV, RGBs, RGsB, RsGsBs, component video, S-video, and composite video
HDTV component video compatible (bi-level or tri-level sync)
Continuously variable level and peaking (sharpness) controls
Additional buffered UTP output (MTP RL 15HD RS only)
LED power indicator on front panel
Compact 1U, quarter rack width, rugged metal enclosure
External international power supply included (part number 70-055-01)
| Video |
| Gain |
Unity |
|
| Video input and loop through |
| Number/signal type |
|
| MTP T 15HD RS |
1 analog RGBHV, RGBS, RGsB, RsGsBs, component;
or 1 S-video and 1 composite video;
or 3 composite video;
and 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
| MTP R 15HD RS |
1 set of proprietary analog signals |
| Connectors |
|
| MTP T 15HD RS |
1 female 15-pin HD |
| MTP R 15HD RS |
1 female RJ-45 |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum levels |
Analog: 0.3 V to 1.45 Vp-p |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 130 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
?50 mV |
|
| Video output |
| Number/signal type |
|
| MTP T 15HD RS |
1 set of proprietary analog signals |
| MTP R 15HD RS |
1 analog RGBHV, RGBS, RGsB, RsGsBs, component;
or 1 S-video and 1 composite video;
or 3 composite video; |
| Connectors |
|
| MTP T 15HD RS |
1 female RJ-45 |
| MTP R 15HD RS |
1 female 15-pin HD |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.45 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
?0 mV with input at 0 offset |
|
| Sync |
| Input type (MTP T 15HD RS) |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type (MTP R 15HD RS) |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Standards |
NTSC, PAL, SECAM |
| Input level (MTP T 15HD RS) |
3.5 V to 5.5 Vp-p |
| Output level (MTP R 15HD RS)l |
4.0 V to 5.0 Vp-p |
| Input impedance |
510 ohms |
| Output impedance |
110 ohms |
| Max. input voltage |
5.5 Vp-p |
| Polarity (MTP R 15HD RS) |
Positive or negative (DIP switch-selectable) |
|
| Control/remote ?external device (pass-through, bidirectional) |
| Serial control port input/output |
|
| MTP T 15HD RS |
RS-232 via a 3.5 mm, 3 pole captive screw connector |
| MTP R 15HD RS |
1 set of proprietary analog signals on a female RJ-45 jack |
| Serial control port output/input |
|
| MTP T 15HD RS |
1 set of proprietary analog signals on a female RJ-45 jack |
| MTP R 15HD RS |
RS-232 via a 3.5 mm, 3 pole captive screw connector |
| Baud rates |
Up to 38400 bps at up to 500' (152 m) (Higher data rates are possible. Performance will vary based on baud rate and cable length.) |
| Protocol |
Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none |
| NOTE |
|
Protocol is mirrored between the transmitter and the receiver. | |
| Serial control pin configurations |
Captive screw connectors: 1 = TX, 2 = RX, 3 = GND |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.5 A |
| Temperature/humidity |
Storage -40?to +158캟 (-40?to +70캜) / 10% to 90%, noncondensing
Operating +32?to +122캟 (0?to +50캜) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional rack shelf, part #60-190-01, #60-604-01, #60-190-20, or #60-604-20
Also furniture mountable with optional mini under-desk mount kit #70-212-01 or projector mountable with bracket kit #70-077-04 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.) |
| Product weight |
0.4 lbs (0.2 kg) |
| Shipping weight |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
