|
 |
 |
|
 |
The Extron RGB 202 Rxi is a rack-mountable, universal interface that combines two input switching with computer-video and audio interfacing capabilities, as well as RS-232 and contact closure control. The RGB 202 Rxi provides exceptional computer-video interfacing features and performance to eliminate almost all connection problems and line driving limitations. It is compatible with VGA뻈XGA, Mac, Sun? SGI, and other computer-video signals. The RGB 202 Rxi is ideal for a wide range of applications due to its innovative features including: two input switching; compatibility with analog, ECL, or TTL signals; active audio interfacing; enhanced Advanced Digital Sync Processing (ADSP? that ensures compatibility with digital displays such as DLP, LCD, D-ILA?LCoS, plasma, etc.; separate horizontal and vertical centering; variable level and peaking; and improved heat management to allow for various mounting configurations.
The RGB 202 Rxi is housed in a rack-mountable, compact, vented rugged metal enclosure. It can be mounted under or through a desk or other surface with the use of an optional under-desk or through-desk mounting kit.
- 300 MHz (-3 dB) RGB video bandwidth
- Advanced Digital Sync Processing (ADSP?
- 30 memory locations for automatic signal setup
- Active PC audio to balanced audio interfacing
- Variable level and peaking
- Horizontal and vertical centering (in one-pixel increments) with memory for each input
- Easy-to-read LCD display indicates H&V sync rates
- Simultaneous output of composite sync and separate H&V sync
- Automatic sync stripping from red, green, and blue channels
- Switching control through front panel, RS-232, and contact closure
- Sync on green output (DIP switch-selectable)
- Digital Display Sync Processing (DDSP?, DIP switch-selectable
- Serration pulse removal (DIP switch-selectable)
- Choice of sync polarities (DIP switch-selectable)
- Choice of vertical sync pulse widths (DIP switch-selectable)
- 75 ohm termination for either input (DIP switch-selectable)
- Two 9VDC, 2.5 mm, MBC power jacks
- Internal international power supply
- Vented, rack-mountable, rugged metal enclosure
- Optional kits for under-desk mounting or through-desk mounting
| Video |
| Routing |
2 x 1 router |
| Gain |
0.5V to 1.45V p-p |
| Bandwidth |
300 MHz (-3dB) |
| Rise time |
1.5 ns |
| Video input |
| Number/signal type |
2 analog: RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
(2) 9-pin D male for MBC/LBC cable or buffer |
| Nominal level |
0.7V p-p for RGB |
| Minimum/maximum levels |
Analog: 0.3V to 1.45V p-p with no offset at unity gain |
| Impedance |
75 ohms or high Z, switchable (set to 75 ohms if no local monitor is connected) |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
40 Hz to 140 Hz |
| Return loss |
<-30dB @ 5 MHz |
| Maximum DC offset |
4V |
| Video signal characteristics ?RGB 202 Rxi VTG only |
| Dot clock |
VGA 25.18 MHz,: Mac 30.04 MHz, SVGA 65.04 MHz, SGI 107.4 MHz |
| Pixel clock accuracy |
> 99.02% |
| Scan rate accuracy |
> 99.03% |
| Frequency range |
VGA: 31.475 kHz x 60 Hz, |
|
SVGA: 37.879 kHz x 60 Hz, |
|
XGA: 48.392 kHz x 60 Hz, |
|
SGI: 63.928 kHz x 60 Hz |
| Rise/fall time |
2.5 ns / 2.0 ns, measured |
| Video output |
| Number/signal type |
1 analog RGBHV, RGBS, RGsB |
| Connectors |
6 BNC female |
| Nominal level |
0.7V p-p for RGB |
| Minimum/maximum levels |
0.3V to 1.30V p-p with 0.7V p-p nominal input level |
| Impedance |
75 ohms |
| Return loss |
-30dB @ 5 MHz |
| DC offset |
?mV maximum with input at 0 offset |
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB |
| Input level |
2V to 5.5V p-p with ?.2VDC offset max. |
| Output level |
TTL: 4V to 5V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Max. propagation delay |
85 ns |
| Max. rise/fall time |
2 ns |
| Polarity |
RGBHV: tracks polarity (or force negative sync via DIP switch) |
| RGBS, RGsB |
negative |
| Audio |
| Routing |
2 x 1 stereo router |
| Gain |
Unbalanced output: 0dB; balanced output: +6dB |
| Frequency response |
20 Hz to 20 kHz, ?.05dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N |
>90dB at rated maximum output (17dBu), balanced |
| Crosstalk |
<-90dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>90dB @ 1 kHz to 20 kHz |
| Audio input |
| Number/signal type |
2 PC level stereo, unbalanced |
| Connectors |
(2) 3.5 mm stereo jacks (female) (2 channel); tip (L), ring (R), sleeve (ground) |
| Impedance |
>10 kohms, unbalanced, DC coupled |
| Nominal level |
-10dBV (316mV) |
| Maximum level |
+8.5dBu, (balanced or unbalanced) at 1%THD+N |
| Audio output |
| Number/signal type |
1 buffered stereo (2 channel), balanced/unbalanced |
| Connectors |
(1) 3.5 mm, captive screw connector, 5-pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
?.1dB channel to channel |
| Maximum level (Hi-Z) |
>+14dBu, balanced at stated %THD+N |
| Maximum level (600 ohm) |
>+8.5dBm, balanced at stated %THD+N |
| Control/remote ?interface |
| Serial control port |
RS-232, 9-pin female D connector (also used for contact closure) |
| Baud rate and protocol |
9600, 8-bit, 1 stop bit, no parity |
| Serial control pin configuration |
2 = TX,: 3 = RX, 5 = GND |
| Contact closure |
1: 9-pin female D connector (also used for RS-232) |
| Contact closure |
pin configuration: 1 = input #1, 4 = input #2, 5 = GND |
| Program control |
Extron's control program for Windows |
|
Extron's Simple Instruction Set?_ SIS?/TD> |
| Input power |
100VAC to 240VAC, 50/60 Hz, 18 watts, internal, autoswitchable |
| MBC power jacks |
9.0VDC, 0.15A |
| Temperature/humidity |
Storage -40?to +158캟 (-40?to +70캜) / 10% to 90%, non-condensing |
|
Operating +32?to +113캟 (0?to +45캜) / 10% to 90%, non-condensing |
| Rack mount |
Yes, with an optional rack shelf (part #60-190-01) |
| Furniture mount |
Yes, with an optional under-desk mounting kit (part #70-077-01) or |
|
through-desk mounting kit (part #70-077-02) |
| Enclosure type |
Metal, vented |
| Enclosure dimensions |
1.75" H x 8.75" W x 8.6" D: (1U high, half rack width) |
|
4.4 cm H x 22.2 cm W x 21.8 cm D |
|
(Depth excludes knobs.) |
| Product weight |
RGB 202 Rxi: 2.2 lbs (1.0 kg) |
| RGB 202 Rxi VTG |
2.3 lbs (1.0 kg) |
| Shipping weight |
5 lbs (2.3 kg) |
| Vibration |
ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A |
| MTBF |
30,000 hours |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
