|
 |
 |
|
 |
The Extron RGB 109xi with ADSP is a dedicated computer-video interface with a 15-130 kHz scanning range, 300 MHz (-3 dB) of RGB video bandwidth, and a 15-pin HD connector. It is compatible with VGA-QXGA, Mac G3, and Mac G4 display signals, and will convert computer-generated, unbalanced audio to balanced, line level audio. Sync processing is achieved through Extron's exclusive Advanced Digital Sync Processing (ADSP) technology, ensuring compatibility with digital display devices such as DLP, LCD, D-ILA™/LCoS, plasma, etc.
- 300 MHz (-3 dB) RGB video bandwidth
- Advanced Digital Sync Processing (ADSP)
- Active PC audio to balanced audio interfacing
- Three-position level/peaking switch
- Horizontal centering control
- Sync on green output (DIP switch-selectable)
- Automatic sync stripping from red, green, and blue
- Serration pulse removal (DIP switch-selectable)
- Digital Display Sync Processing (DDSP™), DIP switch-selectable
- ID bit termination on pins 4 and 11
- Internal international power supply
- Rugged metal enclosure
| Video |
| Gain |
Unity (0.7V), (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking |
| Bandwidth |
300 MHz (-3dB) |
| Video input |
| Number/signal type |
1 analog RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
RGB 109xi: (1) 15-pin HD male, 48" long cable |
|
RGB 112xi: (1) 13W3 male, 48" long cable |
| Nominal level |
0.7V p-p for RGB |
| Minimum/maximum levels |
Analog: 0.3V to 1.5V p-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
Autoscan 15 kHz to 130 kHz |
| Vertical frequency |
Autoscan 30 Hz to 120 Hz |
| Return loss |
<-30dB @ 5 MHz |
| Maximum DC offset |
4.0V |
| Video output |
| Number/signal type |
1 analog RGBHV, RGBS, RGsB |
| Connectors |
6 BNC female |
|
RGB 109xi: (1) 15-pin HD female local monitor output (buffered) |
|
RGB 112xi: (1) 13W3 female local monitor output (buffered) |
| Nominal level |
0.7V p-p for RGB |
| Minimum/maximum levels |
Analog: 0.7V to 0.75V p-p with 0.70V p-p input |
| Impedance |
75 ohms |
| Return loss |
-30dB @ 5 MHz |
| Sync |
| Input type |
RGBHV TTL (±), RGBS TTL (±), RGsB 0.3V (-), RsGsBs 1.3V (-) |
| Output type |
RGBHV (±), RGBS(±), RGsB (-) |
| Input level |
2.0V to 5.5V p-p with ±0.2VDC offset (max.) |
| Output level |
4.0V to 5.0V p-p, unterminated |
| Input impedance |
10 kohms |
| Output impedance |
75 ohms |
| Max. propagation delay |
48 ns |
| Max. rise/fall time |
3.5 ns |
| Polarity |
RGBHV: when RGBHV is input, polarity follows input; |
|
otherwise negative |
| RGBS, RGsB |
negative |
| Audio |
| Gain |
Unbalanced output: 0dB; balanced output: +6dB |
| Frequency response |
20 Hz to 20 kHz, ±0.05dB |
| THD + Noise |
0.03% @1 kHz,: 0.3% @ 20 kHz at nominal level |
| S/N |
>90dB at rated maximum output (14dBu), balanced |
| Stereo channel separation |
>95dB @ 1 kHz to 20 kHz |
| Audio input |
| Number/signal type |
1 PC level stereo, unbalanced |
| Connectors |
(1) 3.5 mm stereo plug, 24" cable from computer video connector; tip (L), ring |
|
(R), sleeve (ground) |
| Impedance |
>10 kohms, unbalanced, DC coupled |
| Nominal level |
-10dBV (316mV) |
| Maximum level |
+8.5dBu,: (unbalanced) at 1%THD+N |
| Audio output |
| Number/signal type |
1 stereo (2 channel), balanced/unbalanced |
| Connector |
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance |
50 ohms unbalanced,: 100 ohms balanced |
| Gain error |
±0.1dB channel to channel |
| Maximum level (600 ohm) |
> +14dBm, balanced at stated %THD+N |
| General |
| Power |
100VAC to 240VAC, 50/60 Hz, 15 watts, internal, autoswitchable |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
|
Operating +32° to +104°F (0° to +40°C) / 10% to 90%, non-condensing |
| Rack mount |
No |
| Furniture mount |
Yes, with optional kits #70-077-01 (under-desk) and #70-077-02 (through-desk) |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.75" H x 6.4" W x 6.0" D |
|
4.4 cm H x 16.3 cm W x 15.2 cm D |
|
(Depth excludes connectors.) |
| Product weight |
RGB 109xi: 1.8 lbs (0.8 kg) |
|
RGB 112xi: 1.9 lbs (0.9 kg) |
| Shipping weight |
4 lbs (1.8 kg) |
| Vibration |
ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A |
| MTBF |
30,000 hours |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
