Independent input equalization with user-selectable levels, compensates for long HDMI cables, and reduces the need for additional signal conditioning equipment. The SW HDMI Series switchers are user-configurable for manual or autoswitching modes. Autoswitching allows any input of the switcher to be selected automatically when the switcher detects a signal.

Convenient control options allow easy integration into a variety of environments, and include front panel control, IR, and RS-232, and autoswitching. To further simplify integration, both SW HDMI switchers are housed in compact, 1U, half rack width enclosures that are easily mounted into optional Extron 1U Universal Rack Shelf Kits.

Features

 

• HDMI, CEC, and embedded multi-channel digital audio switching

•  

•  

•  

•  

•  

•  

•  

•  

•  

•  

SW 2 HDMI, SW 4 HDMI
Video
Gain	Unity
Maximum data rate	1.65 GHz data rate
Switching speed	200 ns (max.)
Resolution	Up to HDTV (1080p) or 1920x1200 @ 60 Hz (the highest resolution of the single link DVI standard)
HDCP	Switched/pass-through
Video input
Number/signal type	2 or 4 HDMI digital component video
Connectors	2 or 4 female HDMI type A
Nominal levels
Digital video	1.2 Vp-p
DDC (Display Data Channel)	TTL: 5.0 Vp-p
Minimum/maximum levels	0.5 V to 1.0 Vp-p with no offset
Impedance	100 ohms
Equalization	Switch selectable for up to -12 dB of cable loss
TDMS clock jitter	0.30 Tbit relative to ideal recovery clock
NOTE     Tbit = one tenth of the pixel time. Tbit = time required to carry a single bit across the TDMS data channel. Tpixel = time required to carry a single pixel across the TDMS data channel.
TDR rise time (10%-90%)	<200 ps
Video output
Number/signal type	1 HDMI digital component video
Connectors	1 female HDMI type A
Nominal level	1.2 Vp-p
Minimum/maximum levels	0.5 V to 1.0 Vp-p (follows input)
Impedance	100 ohms
TDMS clock jitter	0.25 Tbit (max.) relative to ideal recovery clock
NOTE     Tbit = one tenth of the pixel time. Tbit = time required to carry a single bit across the TDMS data channel. Tpixel = time required to carry a single pixel across the TDMS data channel.
Rise time (20%-80%)	>75 ps
Fall time (20%-80%)	>0.4 Tbit
Control/remote ?switcher
Serial control port	(1) RS-232, 3.5 mm captive screw connector, 5 pole (shared with autoswitching control)
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations	1 = TX, 2 = RX, 3 = GND
Contact closure	(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232)
Contact closure pin configurations	Pins 4 and 5 shorted together turn autoswitch mode on.
IR controller module	IR 102 remote control (optional) 30' maximum, 40 degrees off axis
Program control	Extron's control/configuration program for Windows?lt;BR>Extron's Simple Instruction Set (SIS?lt;/SUP>)
General
External power supply	100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements	12 VDC, 0.7 A
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, unvented
Rack mount	Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01(RSU129) or 60-604-01 (RSB129); 1U, 6" deep rack shelf, part #60-190-10 (RSU126) or 60-604-10 (RSB126); or 1 U, 3.5" deep VersaTools?rack shelf, part #60-190-20 (RSU123) or 60-604-20 (RSB123) Also furniture mountable with optional Under Desk Mounting Kit, part #70-077-01 (MBU125); or Through Desk Mounting Kit, part #70-077-02 (MBD129)
Enclosure type	Metal
Enclosure dimensions	1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.)
Product weight	0.5 lbs (0.3 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Listings	UL, CUL
Compliances	CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF	30,000 hours
Warranty	3 years parts and labor
NOTE     All nominal levels are at ?0%.
NOTE     Specifications are subject to change without notice.